Real-Time Diagnosis

Real-time Diagnosis

OPERATION

1. Select {Current Data Display & Save} in �Engine Diagnosis� display screen.

2. Make sure that normal display is shown when operated as follows:
- Depress and release the brake pedal. (Stop light switch and brake switch are turned to ON.)
- Turn the "CRUISE" switch to ON.
- Turn the "CANCEL" switch to ON.
- Turn the "SET/COAST" switch to ON.
- Turn the "RESUME/ACCEL" switch to ON.
- Depress or release the clutch switch.
- Place the shift lever in any position other than neutral.

NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".