Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2010 >> Outback Sport F4-2.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Oil Temperature Sensor For ECM >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Temperature Sensor For ECM: Service and Repair

Oil Temperature Sensor

REMOVAL

1. Disconnect the ground cable from battery.






2. Remove the air intake chamber.
3. Remove the bolt, and remove the engine harness connector from the bulkhead harness connector and rear engine hanger.






4. Disconnect the connector from oil temperature sensor.
5. Remove the oil temperature sensor.






INSTALLATION

Install in the reverse order of removal.

NOTE: Apply liquid gasket to the oil temperature sensor threads.

Liquid gasket: ,THREE BOND 1324 (Part No. 004403042) or equivalent







pro multis · About Operation CHARM