PCV Valve Hose: Service and Repair
PCV HOSE ASSEMBLYREMOVAL
CAUTION: Do not remove unless the hose and the diagnostics connector are broken.
1. Remove the collector cover.
2. Disconnect the connector (A) from the PCV hose assembly A, and remove the PCV hose assembly A from the rocker cover RH.
3. Disconnect the connector (A) from the PCV hose assembly B, and remove the PCV hose assembly B from the rocker cover LH.
4. Remove the intake manifold.
5. Remove the turbocharger.
6. Remove the intake duct.
7. Remove the PCV hose assembly C from the intake duct and the cylinder block RH.
NOTE: Pinch the clamp of the PCV hose assembly C by fitting the cut out in the ST with the protrusion on the clamp as shown in the figure, and unlock the clamp.
ST 18353AA000 CLAMP PLIERS
INSTALLATION
1. Install the PCV hose assembly C to the intake duct and the cylinder block RH.
NOTE: Use a new clamp for the PCV hose assembly C, fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.
ST 18353AA000 CLAMP PLIERS
2. Install the intake duct.
3. Install the turbocharger.
4. Install the intake manifold.
5. Install the PCV hose assembly B to the rocker cover LH, and connect the connector (A) to the PCV hose assembly B.
6. Install the PCV hose assembly A to the rocker cover RH, and connect the connector (A) to the PCV hose assembly A.
7. Install the collector cover.