Lower Inner Trim

Lower Inner Trim

REMOVAL

1. Remove the hook, and remove the inside scuff plate.

CAUTION: Do not pull with excessive force. There is the possibility of the scuff plate being damaged.







2. Remove the door molding (A), and remove the outside scuff plate.







3. Remove clip (A), and remove the front pillar lower trim.







4. Remove the rear seat cushion.
5. Remove clip (A), and remove the inside scuff plate.

CAUTION: Do not pull with excessive force. There is the possibility of the scuff plate being damaged.







NOTE:
- To facilitate the work, remove the weather strip and access the scuff plate tabs from behind the floor mat.
- To release the tabs on the front edge of the scuff plate easily, use a clip remover.







6. Remove door molding (A) and door catcher cover (B), then remove the outside scuff plate.







7. Spread the lower trim tab outward to disengage and pull the upper trim to remove.







8. Remove the clips of the center pillar lower trim.







INSTALLATION

Install each part in the reverse order of removal.