Assembly
ASSEMBLY1) Clean all the parts before assembly.
2) Apply grease to each part.
Grease:
Except for shift lock part:
NIGTIGHT LYW No. 2 grease or equivalent
Shift lock part:
SANKOL or equivalent
3) Assemble in the reverse order of disassembly.
NOTE:
- When installing the plate guide COMPL, set the select lever to the "D" range (normal mode position), and be careful for the following points.
- Insert protrusion (B) of the plate guide COMPL into the hole on the solenoid unit (A).
- Insert link (D) of the shift lock release into link (C) of the solenoid unit.
- Connect the switch and solenoid terminals to the connector.
4) After completing installation, shift the select lever from "P" range to "D" range, then check whether the indicator and select lever matches, whether the pointer and position mark matches and whether the operating force occurs.