Disassembly

DISASSEMBLY

1) Remove the gasket and plate COMPL.





2) Insert a flat tip screwdriver with a thin tip under the connector and disconnect each connector from the plate COMPL.





3) Remove the spacer bolt and remove the plate guide COMPL.





4) Remove the shift lock clamp, spring A, select lever rod, lock plate cushion, and bushing.





5) Remove the detent spring.





6) Remove the solenoid unit.





7) Raise the claw of connector.





8) Disconnect the terminals of the SPORT mode switch, "P" range switch, and solenoid unit from the connector, using a flat tip screwdriver with a thin tip.





9) Remove the grommet.





10) Pull out the spring pin.





11) Pull out the arm COMPL, remove the select lever COMPL, and remove the bracket arm detent and bushing.





12) Remove the rod detent and spring detent from the bracket arm detent.