Tailgate Latch: Testing and Inspection

Rear Gate Latch and Actuator Assembly

INSPECTION

1. LATCH
Check if the latch operates normally.
If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the latch and actuator - rear gate.

2. ACTUATOR

UNIT INSPECTION

PREPARATION TOOL: Circuit tester

1. Check door lock operation
Check the door lock operation when battery voltage is applied between the terminals of actuator.






2. CHECK SWITCH.
Check the resistance between actuator terminals.






3. If it does not operate properly as a result of inspection, replace the latch and actuator - rear gate.