Body Control Module: Service and Repair
Body Integrated UnitREMOVAL
1. Remove the knee airbag module.
2. Release the lock and remove the fuse holder.
3. Remove the relay & fuse box.
1. Disconnect the connector.
2. Remove the bolts and nuts, and remove the relay & fuse box.
4. Remove the body integrated unit.
CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
1. Disconnect the connector.
2. Release the lock, and remove the data link connector bracket from the bracket.
3. Release the claws, and pull out the body integrated unit from the bracket.
INSTALLATION
CAUTION:
- Before handling the airbag module, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM".
- Do not allow harness and connectors to interfere or get tangled up with other parts.
Install each part in the reverse order of removal.
NOTE: Refer to "INSTALLATION" of "Knee Airbag Module".
Tightening torque:
Relay & fuse box: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
NOTE: Make sure that there are no differences from the contents of the current settings after installation.