Removal and Replacement

Ignition Key Lock

REPLACEMENT

1. Disconnect the ground cable from battery.
2. Remove the column assembly - steering.
3. Remove the ignition key lock.
1. Secure the column assembly - steering in a vise.
2. Remove the bolts and clips, and remove the dynamic damper.






3. Use the reverse tap or drill to remove the set bolt and remove the ignition key lock.






4. Install the ignition key lock.
1. Secure the ignition key lock to the column assembly - steering.
2. Use new set bolts. Tighten the bolt until the bolt head is broken (bolt head wrenched off).