Check Security System Condition Memory

Security System

CHECK SECURITY SYSTEM CONDITION MEMORY
1. Remove the key from ignition switch.
2. Close all doors and the rear gate.
3. Open the front hood.
4. Press the LOCK button of transmitter, and then wait until the security indicator light flashes twice for 0.5 seconds at intervals of 2 seconds.
5. Disconnect the ground cable from the battery.
6. Connect the battery ground cable to the battery.
7. Check that the security indicator light blinks twice within 0.5 seconds at 2 second intervals. When it does not blink, replace the body integrated unit.