Curtain Airbag Sensor
Curtain Airbag SensorREMOVAL
CAUTION: Do not separate the curtain airbag sensor and bracket. Doing so will cause the airbag system malfunction. If the sensor is removed from the bracket, be sure to replace with a new part.
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
3. Remove the rear quarter lower trim.
4. Remove the nut and disconnect the airbag connector to remove the curtain airbag sensor.
INSTALLATION
CAUTION:
- Do not reuse the bolt and nut.
- Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)