Cylinder Head Assembly

Cylinder Head Bolts

For Cylinder Head Torque & Sequence, Service and Repair

Warping limit 0.020 mm (0.0008 in)

Standard height of cylinder head 124±0.05 mm (4.88±0.0020 in)

NOTE:
Uneven torque for the cylinder head bolts can cause warpage. When reinstalling, pay special attention to the torque so as to tighten evenly.





Camshaft Bearing Cap

Tightening torque
(1) - (12) 16 Nm (1.6 kgf-m, 11.8 ft-lb)
(13) - (17) 9.75 Nm (1.0 kgf-m, 7.2 ft-lb)





After tightening the camshaft cap, ensure the camshaft rotates only slightly while holding it at base circle.

Cam Sprocket Bolts Specifications