Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Rear Gate
ADJUSTMENTAdjust the clearance around the panel - rear gate as follows.
1. Adjust the vertical and horizontal positions of the panel - rear gate.
1. Loosen the mounting bolts of the hinge - rear gate.
2. Adjust the vertical and horizontal clearance of the panel - rear gate.
Tightening torque:
25 N.m (2.55 kgf-m, 18.4 ft-lb)
2. Adjust the surface level gap between the panel - rear gate and the body.
1. Remove the trim panel - rear skirt.
2. Loosen the bolt.
3. Tap the striker - rear gate using a plastic hammer to adjust the surface level gap between the panel - rear gate and the body.
Tightening torque:
25 N.m (2.55 kgf-m, 18.4 ft-lb)