Engine Controls - Extended Cranking Time To Start
NUMBER: 11-131-13DATE: 04/03/13
APPLICABILITY:
2013MY Legacy & Outback 2.5L NA Models
SUBJECT:
ECM Reprogramming for Extended
Engine Cranking
INTRODUCTION
This Bulletin announces the availability of ECM reprogramming files to address an extended engine cranking condition caused by camshaft positioning at the time the engine is shut off.
COUNTERMEASURE IN PRODUCTION
PACK FILE APPLICABILITY
SERVICE PROCEDURE / INFORMATION
^ In the event of an ECM replacement, always confirm the new ECM has the most recent software and CID number installed before releasing the vehicle.
^ REMEMBER: CID numbers are CASE-SENSITIVE.
WARRANTY / CLAIM INFORMATION
Disclaimer