Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair

REMOVAL
- Disconnect negative cable at battery.
- Disconnect TPS connector.

Removing Terminals:





- Pull out TPS wire harness terminals from connector after unlocking terminal lock.
- Remove TPS from throttle body.

INSTALLATION
- Install TPS to throttle body.

Installing TPS:





- Fit sensor to throttle body in such way that its adjusting holes are a little away from sensor mounting bolt holes as shown and turn sensor clockwise so that those holes align. Then hand-tighten sensor mounting bolts in aligned holes.

Inserting Terminals:





- Insert TPS terminals into connector and check to make sure that they are locked.
- Adjust installation angle of TPS.
- Connect battery negative cable to battery.