Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Temperature Sensor: Service and Repair

REMOVAL
- Disconnect battery negative cable at battery.
- Drain engine cooling system.
- Disconnect WTS coupler.
- Remove WTS from cylinder head.

INSTALLATION
- Reverse removal procedure noting the following.
- Check gasket for damage and replace if necessary.
- Tighten WTS to specified torque.

TIGHTENING TORQUE
5 - 15 N-m (0.5 - 1.5 kg-m, 4 - 10.5)

- Connect coupler to WTS securely.
- Be sure to check that no cooling water leakage exists after installation.