Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 1992 >> Swift L4-1298cc 1.3L SOHC 3 TBI 8V >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair




REMOVAL
1. Disconnect battery negative cable at battery.

2. Remove air cleaner assembly referring to section 6A1.

3. Disconnect coupler from TPS.

4. Remove TPS from throttle body.


Installing Throttle Position Sensor:





INSTALLATION
1. Install TPS to throttle body.

Fit TPS to throttle body in such way that its adjusting holes are a little away from TPS screw holes as shown and turn TPS clockwise so that those holes align. Then hand-tighten TPS screws.

2. Adjust installation angle of TPS.

3. Connect coupler to TPS securely.

4. Install air cleaner assembly.

5. Connect battery negative cable to battery.
pro multis · About Operation CHARM