C. Wire Harness

C.Wire Harness
(1994-1995 vehicles: pin 99980-46060-003; 1996 vehicles: p/n 99980-46061-003)

1. Remove RH speaker cover and glove box pivot pin.

2. Remove the glove box from the passenger side.

3. Remove the 12-pin wire harness from the main unit. Be careful not to cut any wires.

4. Remove all bullet and plug connectors from the harness and remove the harness.

^ Gray wire: Unplug the gray wire from the domelight connector located in the door frame post between the front and rear doors on the passenger side of the vehicle.

5. Install new harness into vehicle. Plug harness into the main unit and connect all bullet and plug connectors.

6. Re-install the speaker cover.

7. Re-install the glove box.