D. Door Lock Wiring Harness

D. Door Lock Wiring Harness
(1994-1995 vehicles: pin 99980-46060-004; 1996 vehicles: p/n 99980-46061-004)

1. Remove the driver's side speaker cover and speaker from the kick panel.

2. Reach inside and disconnect the blue plug connector.

3. Remove RH speaker cover and Glove Box Pivot Pin.

4. Remove the glove box from the passenger side.

5. Unplug the blue 2-pin wire connector from the main control unit. Remove the door lock wiring harness by pulling it through to the driver's side of the vehicle.

6. Plug in the blue 2-pin connector from the new harness to the main control unit. Run the wire under the dash to the door lock (blue plug connector). Make sure the connection is secure.

7. Reinstall the speaker covers and glove box.