Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Belt: Service and Repair



REMOVAL
1. Disconnect negative cable at battery.




2. Loosen drive belt adjusting bolt and pivot bolts. When servicing vehicle equipped with A/C, remove compressor drive belt before removing waterpump belt.
3. Slacken belt by displacing generator and then remove it.

INSPECTION
Inspect pump belt for wear or cracks, cuts, deformation and cleanliness. If it is necessary, replace belt.

INSTALLATION
1. Install belt to water pump pulley, crankshaft pulley and generator pulley. Install A/C compressor drive belt, if equipped.
2. Adjust belt tension as specified.




WATER PUMP BELT TENSION INSPECTION
1. Check belt tension. It should be within specification.
2. If tension is out of specification, adjust it. Service and Repair

.