Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor: Testing and Inspection






OUTPUT VOLTAGE INSPECTION
1. Turn ignition switch to OFF position.
2. Hoist vehicle a little.
3. Disconnect connector of wheel speed sensor.





4. Connect voltmeter between connector terminals.
5. While turning wheel at a speed of approximately 2/3 to 1 full rotation per second, check AC voltage of sensor.
Output AC voltage at 2/3 to one rotation per second (29 - 44 Hz): 150 mV or more
If measured voltage is not as specified, check sensor, rotor and their installation conditions.

Reference





When using oscilloscope for this check, check if peak-to-peak voltage meets specification and waveform is complete.
Peak-to-peak voltage at 2/3 to one rotation per second (29 - 44 Hz): 210 mV or more