Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coast/Set, Resume/Accel and Cancel Switches

On-Vehicle Inspection
These switches are built in the combination switch assembly.

CAUTION: Never disassemble combination switch assembly. Disassembly will spoil its original functions.

1. Disable air bag system referring to "Disabling Air Bag System:".




2. Disconnect connector (1) of COAST/SET, RESUME/ACCEL and CANCEL switches.
3. Check for resistance between "SW" and "GND" terminals of disconnected switch connector (1) under each condition below. If check result is not satisfactory, replace combination switch assembly.

COAST/SET, RESUME/ACCEL and CANCEL switch specification
All switches released (OFF): Infinity
CANCEL switch (3) pressed (ON): About 0 Ohm
COAST/SET switch (4) rotated (ON): 200 - 240 Ohm
RESUME/ACCEL switch (2) rotated (ON): 820 - 1000 Ohm