Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair

Extension Case Oil Seal

Removal and Installation
1. Lift vehicle horizontally.
2. Remove rear propeller shaft from extension case.
3. Pry shroud, felt and oil seal with flat-bladed tool.





4. Be sure to apply grease to oil seal lip. Using special tool and plastic hammer, press fit new oil seal (1), felt (2) and shroud (3) up to position ("a", "b") shown in the figure.
Extension case oil seal (2WD vehicle for A/T) installation position
"a": 1 mm (0.01 inch)
"b": 6.5 mm (0.25 inch)
"A": Grease 99000-25010
Special tool
(A): 09940-53111
5. Install rear propeller shaft.