Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2002 >> XL-7 Plus 2WD V6-2.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Selector Shaft >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Selector Shaft: Service and Repair

Manual Selector Assembly Components





Tightening torque
Manual selector assembly bolt (a): 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)

Manual Selector Assembly Removal and Installation
Removal
1. Disconnect negative (-) cable at battery.
2. Remove console box.
3. Disconnect connector for illumination lamp, shift lock solenoid (if equipped)and overdrive OFF switch.
4. Remove selector assembly mounting bolts.





5. Disconnect selector cable (1) from manual selector assembly (2) expanding selector cable clip (3).

Installation
Reverse removal procedure to install manual selector assembly noting the following instructions.
^ Make sure that selector cable clip (3) hold selector cable (1) on manual selector assembly (2) securely.
^ Connect interlock cable end to cam.
^ Tighten manual selector assembly mounting bolts as specified torque.
Tightening torque
Manual selector assembly mounting bolts: 18 Nm (1.8 kgf-m, 13.5 ft. lbs.)
^ Upon completion of installation, confirm that brake (key) interlock system operates properly.

Manual Selector Assembly Inspection





^ Check select lever for smooth and clear-cut movement and position indicator for correct indication. For operation of select lever, refer to the figure.
^ Confirm that brake (key) interlock system operates properly.

pro multis · About Operation CHARM