Front Wiper Motor
Front Wiper MotorMotor Operation in Low Speed
1. Connect battery positive terminal to terminal "L" and its negative terminal to terminal "E".
2. Check motor revolution speed as specification.
Specification
44 - 52 r/min (rpm)
Motor Operation in High Speed
1. Connect battery positive terminal to "H" and its negative terminal to terminal "E".
2. Check motor revolution speed as specification.
Specification
64 - 78 r/min (rpm)
Automatic Stop Operation
1. Connect battery positive terminal to terminal "L" and its negative terminal to terminal "E" and let the motor turn.
2. Disconnect terminal "L" from battery positive terminal, and let the motor stop.
3. Connect terminals "L" and "S" with a jumper wire, and connect terminal "B" to battery positive terminal. Observe the motor turns once again then stops at a specified position.
4. Repeat step 1) to 3) several times and check that the motor stops at the specified position every time. If check result is not satisfied, replace.