Headliner: Service and Repair
Formed Headliner Removal and InstallationFormed Headliner Removal
Tools Required:
KM-475-B Trim Remover
1. Disconnect the negative battery cable.
2. Remove the sunroof molding, if equipped.
3. Remove the passenger assist handles. Refer to Passenger Assist Handles Removal.
4. Remove the plastic retaining clips in the headliner on the driver's side.
5. Remove the sun visors. Refer to Sun Visors with Vanity Mirror Removal.
6. Remove the power sunroof control switch, if equipped. Refer to Power Sunroof Control Switch Removal.
7. Remove the A-, B-, and C-pillar trim panels. Refer to A-Pillar Trim Panel Removal, Upper B-Pillar Trim Panel Removal and C-Pillar Trim Panel Removal.
8. Remove the plastic retainers in the headliner using the trim remover KM-475-B.
9. Recline both front seats.
10. Remove the headliner through a rear door.
Formed Headliner Installation
1. Recline both front seats.
2. Insert the headliner through a rear door.
3. Install the headliner behind the seats around the doors.
4. Install the plastic retainers.
5. Install the A-, B-, and C-pillar trim panels. Refer to A-Pillar Trim Panel Installation, Upper B-Pillar Trim Panel Installation and C-Pillar Trim Panel Installation.
6. Install the power sunroof control switch, if equipped. Refer to Power Sunroof Control Switch Installation.
7. Install the sun visors. Refer to Sun Visors with Vanity Mirror Installation.
8. Install the plastic retainers in the headliner on the driver's side.
9. Install the passenger assist handles. Refer to Passenger Assist Handles Installation.
10. Install the sunroof molding, if equipped.
11. Connect the negative battery cable.