Front

Disc Brake Caliper Description
The caliper has a single bore and is mounted to the steering knuckle with two mounting bolts. Hydraulic pressure, created by applying the brake pedal, is converted by the caliper to a stopping force. This force acts equally against the piston and the bottom of the caliper bore to move the piston outward and to slide the caliper inward, resulting in a clamping action on the rotor. This clamping action forces the linings against the rotor, creating friction to stop the vehicle.

CAUTION:
^ Replace all components included in the repair kits used to service the caliper.
^ Lubricate the rubber parts with clean brake fluid to ease assembly.
^ Do not use lubricated shop air on brake parts, as damage to the rubber components may result.
^ If any hydraulic component is removed or disconnected, it may be necessary to bleed all or part of the brake system.
^ Replace the shoes in axle sets only.
^ The torque values specified are for dry, unlubricated fasteners.
^ Perform the service operations on a clean bench, free from all oily material.