Front

Front Parallel Link

Removal
1. Raise and suitable support the vehicle.
2. Remove the rear wheels.
3. Remove the rear parallel link bolt-to-knuckle and the bolt-to-rear crossmember.





4. Remove the rear parallel link.


Installation
1. Install the front parallel link bolt-to-knuckle and the cam bolt-to-rear crossmember.

Tighten: Tighten the front parallel link bolt-to-knuckle to 110 Nm (81 ft. lbs.)
2. Adjust the rear toe, if needed.





3. Tighten the front parallel link bolt.

Tighten: Tighten the cam bolt to 80 Nm (59 ft. lbs.).