P/S Pump and A/C Compressor (If Equipped) Drive Belt Inspection and Adjustment
P/S Pump and A/C Compressor (If Equipped) Drive Belt Inspection and AdjustmentInspection
^ Check that belt is free from any damage and properly fitted in pulley groove.
^ Check belt tension by measuring how much it deflects when pushed at intermediate point between pulleys with about 10 kg (22 lb) force.
NOTE: When replacing drive belt, adjust drive belt tension to the following specifications.
Adjustment
1. To adjust P/S belt tension, loosen tension pulley bolts (1) and turn tension pulley (3) using hexagon wrench (4).
2. Adjust belt tension to specification, and then tighten tension pulley bolts (1) to specified torque.
