Blower Motor Resistor: Service and Repair

BLOWER MOTOR CONTROLLER REMOVAL AND INSTALLATION

Reference: Blower Unit and Heater Unit Components

Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system referring to Disabling Air Bag System:Advanced Air Bag or Disabling Air Bag System:Except Advanced Air Bag.
3. Remove glove box.
4. Remove passenger lower member.
5. Disconnect blower motor controller coupler (3).




6. Remove blower motor controller (1) by loosening its fastening screws (2).

Installation
Reference: Blower Motor Controller Inspection
1. Reverse removal procedure.
2. Enable air bag system referring to Enabling Air Bag System:Advanced Air Bag or Enabling Air Bag System:Except Advanced Air Bag.