Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2008 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Solar Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Solar Sensor: Service and Repair

Sunload Sensor Removal and Installation

Removal




1. Disconnect negative (-) cable at battery.
2. Remove combination meter from instrument panel referring to Combination Meter Removal and Installation.
3. Remove sunload sensor (1) from instrument panel by depressing tab and pushing sensor upward from underneath.
4. Disconnect sunload sensor connector (2).

Installation
Reference: Sunload Sensor Inspection:Automatic Type
Reverse removal procedure noting the following instructions.




^ Install sunload sensor (1) to instrument panel fitting tab (2) of sunload sensor into the groove (3) of instrument panel as shown in figure.
pro multis · About Operation CHARM