Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2008 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair >> Engine - Charging System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine - Charging System

Water Pump and Generator Drive Belt Removal and Installation

Removal

WARNING: Disconnect negative (-) cable at battery before removing and installing generator belt.

1. Hoist vehicle.
2. Remove right side engine under cover.
3. Loosen tensioner by turning the tensioner pulley (2) clockwise.




4. While holding the tensioner and belt loose, remove generator belt (1).

Installation
1. Loosen tensioner by turning the tensioner pulley (2) clockwise.
2. While holding the tensioner, install generator belt (1).




3. Install right side engine under cover.

NOTE:
- Make sure that the belt fits each pulley's groove properly.
- After installing generator belt, make sure that tension indicator is within standard range referring to Water Pump and Generator Drive Belt On-Vehicle Inspection.
pro multis · About Operation CHARM