Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2008 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Level Sensor: Service and Repair

Main Fuel Level Sensor Removal and Installation





CAUTION:
^ Do not touch resister plate (1) and deform arm (2). It may cause main fuel level sensor to fail.
^ Be very careful not to cause damage to fuel tube installed section (sealed section in bore). If it be damaged, replace it with new one, or fuel will leak from the part.

Removal
1. Remove fuel pump assembly from fuel tank referring to Fuel Pump Assembly Removal and Installation.
2. Disconnect main fuel level sensor connector (3).




3. With pressing snap-fit part (2), remove main fuel level sensor (1) by sliding it in the arrow direction as shown in figure.

Installation
Reverse removal procedure for installation.
pro multis · About Operation CHARM