Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2008 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Pinout Values and Diagnostic Parameters >> Resistance Check
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Resistance Check

Resistance Check

1. Remove ECM from its bracket referring to Engine Control Module (ECM) Removal and Installation.

CAUTION: Never touch terminals of ECM itself or connect voltmeter or ohmmeter (3).

2. Connect special tool to ECM connectors (1) securely.

NOTE: Do not connect the other connector of special tool to ECM.

Special Tool
(A): 09933-06320

3. Check resistance between each pair of terminals of special tool connectors (2) as listed in the following table.

CAUTION:
^ Be sure to connect ohmmeter probe from wire harness side of coupler.
^ Be sure to turn OFF ignition switch for this check.
^ Resistance in the following table represents that measured when parts temperature is 20 °C (68 °F).







pro multis · About Operation CHARM