General Specifications

Disc Brake Component Sepcifications

Brake Pad Lining Min. Thickness 2.0 mm (0.080 in.)
Brake Rotor Diameter 191.00 mm (7.520 in.)
Brake Rotor Discard Thickness* 18.4 mm (0.724 in.)
Max Allowable Lateral Runout 0.06 mm (0.002 in.)
Max Allowable Scoring 1.50 mm (0.059 in.)
Max Allowable Thickness Variation 0.025 mm (0.001 in.)

*All Brake Rotors have a discard dimension cast into them. Replace any rotor that does not meet this specifications. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.