Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2008 >> XL-7 4WD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair

Mass Airflow Sensor/Intake Air Temperature Sensor Replacement




Removal Procedure

1. Remove the air cleaner outlet duct.




2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
3. Remove the MAF/IAT sensor screws.
4. Remove the MAF/IAT sensor from the air cleaner assembly.
5. Remove the MAF/IAT sensor seal.




Installation Procedure
1. Install the MAF/IAT sensor seal to the MAF/IAT sensor.
2. Install the MAF/IAT sensor to the air cleaner assembly.

CAUTION: Refer to Fastener Notice.




3. Install the MAF/IAT sensor screws.

Tightening torque
Tighten the screws to 4 N.m (35 lb.in).

4. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
5. Install the air cleaner outlet duct.
pro multis · About Operation CHARM