Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2008 >> XL-7 4WD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake

Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake




Removal Procedure

1. Remove the air cleaner assembly. Refer to [Air Cleaner Assembly Replacement].




2. Disconnect the engine wiring harness electrical connector (2) from the bank 1 intake camshaft position (CMP) sensor.
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.




Installation Procedure
1. Install the CMP sensor.




2. Install the CMP sensor bolt.

Tightening torque
Tighten the bolt to 10 N.m (89 lb.in).

3. Connect the engine wiring harness electrical connector (2) to the bank 1 intake CMP sensor.
4. Install the air cleaner assembly. Refer to [Air Cleaner Assembly Replacement].
pro multis · About Operation CHARM