Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2009 >> Equator 2WD L4-2.5L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Service and Repair

Intake Sensor: Removal and Installation

REMOVAL

1. Remove the front kick plate.
2. Remove the lower dash side finisher. Refer to [Instrument Panel Assembly: Exploded View].
3. Remove the front pillar lower finisher.
4. Remove the assist grip handle
5. Remove the front pillar upper finisher.
6. Remove the lower glove box. Refer to [Instrument Panel Assembly: Exploded View].
7. Remove the upper glove box (cluster lid E). Refer to [Instrument Panel Assembly: Exploded View].
8. Disconnect the intake sensor electrical connector.






NOTE: The intake sensor is located on the top of the heater and cooling unit assembly next to the A/C evaporator cover.

9. Twist the intake sensor to remove the intake sensor from the heater and cooling unit assembly.

INSTALLATION
Installation is in the reverse order of removal.
pro multis · About Operation CHARM