Key Interlock Cable: Removal and Installation
Key Interlock Cable: Removal and InstallationREMOVAL
1) Unlock slider from adjuster holder by squeezing lock tabs.
2) Remove casing cap from bracket of control device assembly and remove interlock rod from adjuster holder.
3) Remove holder from key cylinder and remove key interlock cable.
INSTALLATION
1) Set key interlock cable to key cylinder and install holder.
2) Turn ignition key to "LOCK" position.
3) Set selector lever to "P" position.
4) Insert interlock rod into adjuster holder.
5) Install casing cap to bracket.
6) Move slider in order to secure adjuster holder to interlock rod.