Clutch: Service and Repair
Clutch Piping: Removal and InstallationCarefully observe the following during clutch tube removal and installation.
CAUTION:
Do not spill brake fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.
^ When installing the clutch hose to the bracket, align the clutch hose metal fittings with the bracket positioning emboss, then install the lock plate to secure.
CAUTION:
^ Do not damage the clutch hose.
^ Make sure the clutch hose is not bent or twisted.
^ Tighten the clutch tube and hose fittings to the specified torque.
CAUTION:
^ Do not reuse the copper washer.
^ Do not damage the clutch tube fittings or clutch tube.
^ After installation, bleed the air from the clutch hydraulic system.