Generator Removal and Installation
Generator Removal and InstallationRemoval
1. Disconnect negative (-) cable from battery.
2. Remove engine cover.
3. Remove accessory drive belt.
4. Remove air cleaner assembly.
N32A:
J24B:
5. Disconnect "B" terminal wire (1) and connector (2) from generator (3).
6. Remove generator (3).
7. For N32A, remove generator bracket (4) if necessary.
Installation
J24B
Reverse removal procedure noting the following.
Tightening torque
Generator bolt (b): 55 N.m (5.6 kg-m, 40.5 lbf-ft)
"B" terminal wire nut (a): 11 N.m (1.1 kg-m, 8.5 lbf-ft)
