Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2010 >> Equator 4WD V6-4.0L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module: Service and Repair

Transfer Control Unit: Removal and Installation

Removal
1) Switch 4WD shift switch to 2WD and set transfer assembly to 2WD.

CAUTION:
When removing transfer control unit, transfer state must be at 2WD.

2) Turn the ignition switch OFF and disconnect negative battery terminal.
3) Remove the lower instrument panel LH.
4) Disconnect the two transfer control unit connectors.





5) Remove the transfer control unit bolts.
6) Remove the transfer control unit.

Installation
Installation is in the reverse order of removal.
^ When installing the transfer control unit, tighten bolts to the specified torque.

Transfer control unit bolts : 3.4 Nm (0.35 kg-m, 30 in-lb)

^ After the installation, check 4WD shift indicator pattern. If NG, adjust position between transfer assembly and transfer control unit.
pro multis · About Operation CHARM