ATP Switch Circuit Check

ATP Switch Circuit Check

Description
The ATP indicator does not come on when the transfer is in neutral and the A/T lever is in neutral or, the ATP indicator stays on when the transfer case is not in neutral.

Diagnosis Procedure
Regarding Wiring Diagram information, refer to [Transfer Control Unit: Wiring Diagram].

Step 1:

Step 1-2:

Step 2-3:

Step 3-4:

Step 4-5:

Step 5-6:

Component Inspection
1) Turn ignition switch "OFF". (Stay for at least 5 seconds.)
2) Disconnect ATP switch harness connector.
3) Remove ATP switch.
4) Push and release ATP switch and check continuity between ATP switch terminals 8 and 9.








5) If the inspection results are abnormal replace the ATP switch.