Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2010 >> Grand Vitara 4WD V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Testing and Inspection >> Ignition Spark Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Spark Test

Ignition Spark Test

1. Remove engine cover.

CAUTION: When removing engine cover, be sure to lift up its front end to prevent breakage of engine cover claws.

2. Remove air cleaner outlet hose.
3. Remove intake upper manifold.
4. Disconnect all fuel injector connectors from injectors.

WARNING: Be sure to disconnect injector connectors. Without disconnection of injector connectors, combustible gas may come out from spark plug holes during this test and may get ignited in engine room.

5. Install intake upper manifold.
6. Remove spark plug and check it for condition and type.
7. If check result is OK, connect ignition coil connector (1) to ignition coil assembly (2) and connect spark plug (3) to ignition coil assembly. Ground spark plug.
8. Crank engine and check if each spark plug sparks.






9. If any spark plug does not produce sparks, inspect ignition system parts.
pro multis · About Operation CHARM