Keyless Start Transmitter: Testing and Inspection

Remote Controller Registration

NOTE: Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the procedure of immobilizer registration.

- Register remote controller ID code using "Immobilizer Key Registration" function in SUZUKI scan tool.
- Remote controller registration is performed through "Immobilizer Key Registration", and this registers the immobilizer transponder code.
- Performing "Immobilizer Key Registration", clears all of the ID codes already registered. Replace all of the remote controllers.
- It is possible to register 4 remote controllers in keyless start control module.
- If the keyless start control module is replaced, replace all of the remote controllers.
- If all of the remote controllers are lost, register remote controllers after replacing keyless start control module.