Procedures

Transfer Oil Change
1) Hoist vehicle.
2) Remove right and left engine under covers, and check oil leakage. If leakage exists, correct it.
3) Remove transfer oil level / filler plug (1).
4) Remove transfer oil drain plug (2), and drain oil.
5) Apply sealant to thread of transfer oil drain plug, and tighten it to specified torque.

"A": Sealant 99000-31260 (SUZUKI Bond No.1217G)

Tightening torque
Transfer oil drain plug (a): 23 Nm (2.3 kg-m, 17.0 lbf-ft)

6) Pour new specified oil up to oil level / filler plug hole (3).

NOTE:
It is highly recommended to use API GL-5 80W-90 gear oil.

Transfer oil specification
: API GL-5 (For SAE classification, refer to viscosity chart [A] in figure.)

Transfer oil capacity
Reference: 0.9 liters (1.90/1.58 US/Imp. pt)

7) Apply sealant to thread of transfer oil level / filler plug, and then tighten it to specified torque.

"A": Sealant 99000-31260 (SUZUKI Bond No.1217G)

Tightening torque
Transfer oil level / filler plug (b): 23 Nm (2.3 kg-m, 17.0 lbf-ft)