Keyless Systems - Transmitter Registration Procedure: Overview
Section Title: Control SystemsTSB No: TS 03 12170
Division: Automotive
Category: Technical
SUBJECT: KEYLESS REMOTE CONTROLLER REGISTRATION PROCEDURE
MODEL(S): KIZASHI (A6B424)
YEAR: 2010
CONDITION:
Registering one or more keyless remote controllers through the "Immobilizer Key Registration" function.
CAUSE:
The addition of new keyless remote controllers, the replacement of lost keyless remote controllers, or the replacement of the keyless start control module.
CORRECTION:
Follow the steps listed in this bulletin to properly register the keyless remote controllers.
> Register remote controller ID code using "Immobilizer Key Registration" function using the SUZUKI SDT scan tool.
> Remote controller registration is performed through "Immobilizer Key Registration", and this registers the immobilizer transponder code.
> It is possible to register up to 4 remote controllers in the keyless start control module.
> If the keyless start control module is replaced, you must reprogram all of the remote controllers. The TPMS sensors will also need to be registered again to the new controller.
> If all of the remote controllers are lost, the keyless start control module must be replaced before any remote controllers can be registered.
TOOLS REQUIRED