Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2010 >> Kizashi FWD L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Relays and Modules - Starting and Charging >> Keyless Start Control Module >> Service and Repair >> Keyless Start Control Module Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Start Control Module Removal and Installation

Keyless Start Control Module Removal and Installation

Removal
1. Disconnect negative (-) cable at battery.
2. Remove driver side instrument panel undercover.
3. Disconnect keyless start control module connectors (1) and harness clamp.
4. Remove nuts (2), and then remove keyless start control module (3).







Installation
Reverse removal procedure noting the following points.
- If keyless start control module is replaced, perform "Immobilizer Key Registration" using SUZUKI scan tool. (refer to SUZUKI SDT Immobilizer Control System Operator's Manual)
pro multis · About Operation CHARM