Component Tests and General Diagnostics
Inspection Of Power Window Anti-Pinching Function1. Open door glass fully.
2. Place wood handle of hammer as shown in figure.
CAUTION: If vehicle is equipped with door visor, put hammer handle from inside the vehicle to prevent it from touching the visor.
NOTE: Use switch on each door when checking.
3. Activate auto up of power window.
4. Check that window glass automatically reverses to prevent pinching the hammer handle (to a point about 250 mm (9.84 in.) below outside top end (1) of glass run-channel.)
5. If the function is faulty, initialize power window system.
