Rear Suspension

Rear Wheel Alignment Inspection

Measure toe and camber referring to "Inspection" under Front Wheel Alignment Inspection and Adjustment Front Wheel Alignment Inspection and Adjustment.

NOTE:

Rear suspension is not adjustable structure.

Rear toe (Total)
: IN 5.0 +/- 5.0 mm (IN 0.1968 +/- 0.1968 in.)

Rear camber
: -1� +/- 1�

If measured value is out of specified value, check following items for damage, deformation and crack.

- Rear axle
- Wheel hub or wheel bearing
- Vehicle body

Reference information

Toe angle

When checked rear toe angle with total wheel alignment tester or the like, refer to the following specification.

Rear toe angle (Each wheel)
: IN 17' +/- 17'